Skip to main content
CallTower Solutions Center

Switches - Configuring MCS Test Device Server Side

This article will walk users through the process of configuring and MCS device on the server for Various sized companies. These different tests include:

Large Deployment Test link
This tests 100 concurrent lines every 5 minutes

Medium Deployment Test link
This tests 25 concurrent lines every 5 minutes

Small Deployment Test link
This tests 5 concurrent lines every 5 minutes

Keep in mind these are based on the number of concurrent calls and not the number of devices the customer has on site. 

Instructions

Login to http://mcs.calltower.com/myspeed/admin from an internal network or from Central Admin

Click into the "Satelites" section on the top bar and Navigate to "View Connected Satelites"

 mcs1.JPG

 

Select the box to the Left of the device you choose to change the Deployment size of and from the Top please choose the correct "RA Task"

mcs2.jpg

After 5 minutes check the reporting tool to make sure you are receiving proper data. Keep in mind that you can verify the test size by checking the "Test Spec" listed when the report is pulled. 

Test Spec.JPG

  • Was this article helpful?